PEG – 4 x 1.2mL (1.4 gm) syringes gel + 8 applicator tips uts
PEG-3 – 3mL (3.54 gm) syringe gel
Characteristics
- 9.6% Hydrofluoric Acid
- Does not stain ceramics or composites
- Superior quality
Description
Proper surface preparation enhances bonding values of resins and resin cements to porcelain. These SEMs taken before and after etching demonstrate the effectiveness of a one-minute application of Pulpdent Porcelain Etch Gel on a glazed porcelain surface.
1
SEM* shows glazed porcelain surface BEFORE treatment.
2
SEM* shows glazed porcelain surface AFTER 1-minute treatment with Pulpdent Porcelain Etch Gel. Note the microscopic tags in the porcelain surface.
(Magnification 500X)
*SEM: Scanning Electron Microscopy
Porcelain Etch Gel Application
1
This fractured PFM crown can be repaired intra-orally. Always etch porcelain surfaces of crowns, inlays and veneers prior to bonding.
2
Apply Pulpdent Porcelain Etch Gel to ceramic surface. The exposed metal surface should be abraded with a fine diamond. Note placement of Kool-Dam (blue) to protect soft tissue.
